Bike On The Ledge #3 – White Dipped


In stock

Bike On The Ledge #3 is handmade from beech wood. To up the style factor, we dipped the poles in a matte white varnish. Each pole has a length of 32 cm and a width of 3 cm. These poles can hold bikes up to 12.5 kg – the weight of most road bikes.

Scroll down to the ‘description’ section for mounting instructions.

Handmade from beech wood and dipped in a matte white varnish, these bike hanging poles are every minimalist’s dream.

Mounting instructions:
1) Select a a section of a load bearing/masonry wall. Before drilling or putting a screw into a wall, be sure you’ve checked what’s behind it with a pipe, cable and stud detector (also known as a multi-purpose digital detector).
2) Find the two points under your bike’s frame where you’d like the poles positioned
3) Mark these two points on the wall using a spirit level
4) Drill two holes (10 mm) where you’ve marked on the wall. Make sure to drill perpendicularly into the wall
5) Insert the plugs into the two holes
6) Screw the poles tightly into the plugs in the wall. Some strength is required.

Additional information

Weight 1.5 kg
Dimensions 32 × 3 × 4 cm


There are no reviews yet.

Be the first to review “Bike On The Ledge #3 – White Dipped”

Your email address will not be published. Required fields are marked *