Bike On The Ledge #2 – Natural Oil – 100% Oak

84.99

Bike On The Ledge #2 is handmade from natural oak wood. Inspired by minimalist floating shelves, it will surely leave you scrambling for knick-knacks or trinkets to display with your bike.

With a length of 30 cm, width of 28 cm and height of 12.5 cm, this bike hanger can hold up to 12.5 kg in weight. The product itself weighs around four kilograms.

Scroll down to the ‘description’ section for mounting instructions.

Bike On The Ledge #2 has a floating look finished with a natural oil. It would compliment any minimalist, modern farmhouse or industrial decor styles.

Mounting instructions:

1) Select a a section of a load bearing/masonry wall. Before drilling or putting a screw into a wall, be sure you’ve checked what’s behind it with a pipe, cable and stud detector (also known as a multi-purpose digital detector).
2) Place the bike hanger against the wall where you would like it mounted using a spirit level
3) Keeping the hanger against the wall (with the spirit level) place your hand inside the hanger and mark the screw holes on the wall with a pen.
4) Remove the hanger to check the three screw holes are marked correctly on the wall
5) Drill three holes (8 mm) where you’ve marked on the wall. Make sure to drill perpendicularly into the wall
5) Insert the plugs into the three holes
6) Place bike hanger back into position against the wall and using a screw driver, screw the screws tightly into the plugs.

Additional information

Weight 4.5 kg
Dimensions 30 × 28 × 12.5 cm

Reviews

There are no reviews yet.

Be the first to review “Bike On The Ledge #2 – Natural Oil – 100% Oak”

Your email address will not be published. Required fields are marked *